Why does washing machine leak from the bottom

There should be no excess water around the appliance at any stage of the cycle. If you notice leakage, it is best to call a professional for the right washing machine troubleshoot steps. They will examine the appliance and find the root cause of the issue. Water leakage can happen for several reasons, so it is essential to check the machine thoroughly. The most common washing machine leakage issues include:.

Hire a professional to visit your property and carry out a washing machine troubleshoot. Walch spent 40 years working in the electrical trades and holds an Associate of Applied Science in applied electrical engineering technology from Alvin Junior College. Home Guides Home Home Improvement. By Jerry Walch. Related Articles. Leaking Pump The most common source of an intermittent leak, a leak that happens only when the machine runs or for a short period of time after the machine shuts off is the pump and its related hose connections.

Defective Fill Valves The hot and cold water solenoid valves have nylon housings that can develop minute cracks. Loose Hose Connection Leaks appearing to come from the bottom of a washing machine can come from areas high up. Defective Tub Seal A less common cause of an intermittent leak from the bottom of a washing machine is a defective tub seal.

Appliance: Washer Repair Tips. In some cases, you can simply hand tighten the water hose. But other times you may need a replacement part or professional serviceman to do the job. If the water leak is underneath the washer, replacing a part called the tub seal will often fix the issue. This is especially true if your washing machine begins to leak during the rinse cycle. To get at the tub seal, you will have to remove the spin basket and potentially flip the washer over.

The catch basket in a washing machine is similar to a lint trap in your dryer. Over time it can become clogged and cause fibers to appear in your washed laundry. But it can also cause the washer to leak from the bottom!

The coupler is a rubber or plastic seal between the motor and the drum of the washing machine. If your washing machine is leaking from the bottom or clothes are still soaked after a cycle, a broken coupler is likely the culprit. Leaks under the washer are commonly caused by a damaged water pump or compromised hoses connected to the pump.

Usually, you will notice lots of rumbling or shaking from the machine during a wash cycle if the pump is faulty. The water pump in a washer is generally located at the bottom of the machine. You can identify the water pump by the two large hoses connected to it. Washing machines can leak gallons of water at a time, and often this occurs overnight or goes unnoticed for hours.